BMYMZ - 5059, SODIUM SULFATE

  • MSDS: BMYMZ
  • Manufacturer: J T BAKER INC
  • Product Name: 5059, SODIUM SULFATE
  • National Stock Number: 6810-00N028941
Product Identification

Product ID:5059, SODIUM SULFATE
MSDS Date:08/14/1987
FSC:6810
NIIN:00N028941
MSDS Number: BMYMZ

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865-2219
US

Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)

Info Phone: 800-582-2537

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

1); (SODIUM SULFATE)

CAS: 7757-82-6

RTECS: WE1650000

Fraction By Weight: 90-100%

Hazards

LD50 LC50 Mixture:LD50:(ORAL MOUSE) 5989 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF DUST MAY CAUSE
IRRITATION TO UPPER RESPIRATORY TRACT. CONTACT W/SKIN OR EYES MAY
CAUSE IRRITATION. INGESTION MAY CAUSE GASTROINTESTINAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.

First Aid

First Aid:INGEST:IF SWALLOWED & PERSON IS CONSCIOUS, IMMEDIATELY GIVE
LARGE AMOUNTS OF WATER. GET MEDICAL ATTENTION. INHAL:IF A PERSON
BREATHES IN LARGE AMOUNTS, MOVE THE EXPOSED PERSON TO FRESH AIR.
GET MEDICA L ATTENTION. EYE:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR
AT LEAST 15 MINS. GET MEDICAL ATTENTION. SKIN:IMMEDIATELY WASH
W/PLENTY OF SOAP & WATER FOR AT LEAST 15 MINS.

Fire Fighting

Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC GASES PRODUCED: SULFUR OXIDE.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. CAREFULLY
SWEEP UP & REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:SUITABLE FOR ANY GENERAL CHEMICAL
STORAGE AREA. KEEP CONTAINER TIGHTLY CLOSED. ISOLATE FROM
INCOMPATIBLE MATERIALS. MATERIAL IS HYGROSCOPIC.
Other Precautions:CAUTION! MAY CAUSE IRRITATION. MAY BE HARMFUL IF
SWALLOWED OR INHALED. DURING USE AVOID CONTACT W/EYES, SKIN &
CLOTHING.

Exposure Controls

Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE AN
APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME OR DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:RUBBER GLOVES ARE RECOMMENDED
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1623F,884C
Spec Gravity:2.68 (H2O=1)
Solubility in Water:APPRECIABLE (>10%)
Appearance and Odor:ODORLESS, WHITE POWDER OR CRYSTALS.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
ALUMINUM, MAGNESIUM, MINERAL ACIDS, STRONG ACIDS & STRONG BASES.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:OXIDES OF SULFUR.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ALL APPLICABLE FEDERAL,
STATE & LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.